IPTV Setup help--STB Emulator/MAG

STB Emulator

This tutorial will guide you through the simple setup instruction for STB Emulator.
STB Emulator’ can emulate the following IPTV set-top boxes.

IPTV Set-top Box Support
MAG 200 Yes
MAG 245 Yes
MAG 250 Yes
MAG 260 Yes
MAG 270 Yes
MAG 275 Yes
Aura HD Yes

STB Emulator Setup Instructions:

  1. Download ‘STB Emulator’ from the Google Play Store here.
  2. Install and Load the ‘STB Emulator’ app and you will see your ‘MAC address’ on screen.
  3. Tap near the ‘Top right corner’ and then click ‘Settings’ – the 4th icon from the right.
  4. Tap ‘Profiles’.
  5. Tap ‘Test portal’ to modify the existing profile or ‘Add profile’ to start a new one.
  6. Tap ‘STB Model’.
  7. Tap ‘MAG 250’ or whichever STB you wish to emulate.
  8. Tap ‘Portal settings’.
  9. Enter your ‘Portal URL’ (Check your activation e-mail) and click OK.
  10. Now tap ‘Screen Resolution’.
  11. Choose ‘1280×720’ (You can choose higher with internet speed 16+ Mbps).
  12. Exit the app and restart.
  13. You will now see your channel list.

Troubleshooting STB Emulator

If you have any problems viewing the Channels please follow this recommended fix:
Restart your App, Device/Box, and Wi-Fi Router.

MAG250  MAG254  MAG256 MAG322

Connect MAG DEVICE to TV and Internet. Then do as follows

  1. Go to: Settings—> System Settings —> Servers—>Portals

  2. Set Portal 1: IPTV

  3. Set Portal 1 URL ( see your E-mail )

  4. Set Portal 2 Name leave this empty add this only If you order the second subscription

  5. Set Portal 2 URL leave this empty add this only If you order the second subscription

  6. Save everything

  7. Reboot device

  8. After the box is restarted, wait until the TV screen shows the channels.